The sixth column shows Android TV and Kodi functions that are available through the Harmony remote and Flirc. These are sent by the Flirc through emulated HID devices as button presses to the Android TV device. The fourth and fifth columns show the HID commands (‘usages’) that the key codes from the third column respresent, from the HID Usage Tables Pages 7 (Keyboard/Keypad), and 13 (Consumer) respectively. The third column has the key codes that the Flirc associates with the Harmony infrared commands from the second column. A different mapping might be more appropriate for other Harmony models. Note that these columns map to the buttons on the Harmony One and Harmony 650. This configuration is done in the Harmony configuration software. The first column concerns a reference mapping of the Harmony buttons to Harmony commands in the second column. Appendix A: Configuration overviewīelow is an overview of the configuration between the Harmony remote and the Android TV device. If some remote commands are not received, consider using a USB extension cable to bring the Flirc to the front. The Shield TV’s USB ports are on the back of the device. You can immediately use it to navigate both Android TV and any applications you start, such as Kodi. The infrared commands in the configuration file and in the Flirc Kodi device profile for the Logitech Harmony are exclusively used by Flirc and should therefore not conflict with any other devices.Īlternatively, use the configuration overview in Appendix A or the scripts in Appendix B to configure the Flirc manually.Īfter you are done, connect the Flirc with the Android TV device. If none work, you can make your own Flirc configuration for the firmware you have using the scripts in Appendix B.Įnsure that any built in profiles are disabled to avoid configuration conflicts. If you have a firmware between 4.4 and 4.9, try each and see which works. Load the matching configuration file into the Flirc. Check which firmware version the Flirc is running. An example mapping is given in Appendix A. It is up to the user to configure one or more activities and to map commands to buttons on the remote. This is all the configuration that is strictly necessary for the Logitech Harmony remote. Use command ‘PowerOff’ as the (only) power off command.Use command ‘ZoomLevel1’ as the (only) power on command.‘A button on the remote for On, and a different button for Off’ / ‘I press two different buttons for on and for off’.‘I want to turn off this device when (it’s) not in use’.In the software for the Harmony remote, the new device’s power settings can be configured as follows to allow activities to switch the device on and off when necessary: This is normal.Ī Shield TV can be switched on and off using Flirc, and possibly other Android TV devices as well. Device (only needed for Harmony Remote Software): Computer -> Media Center PCĪfter the device is added, it might be named ‘Flirc Media Player’.Configuring the Logitech Harmony remoteĭepending on which remote model you have, use either the older Harmony Remote Software or the newer MyHarmony to configure the remote.Īdd a new device using the following information: A bonus is that it is not required anymore to modify Kodi’s configuration by hand, since media keys are supported by both Android TV and Kodi natively. Now most keys use media keys from the USB HID Usage Consumer Page instead. In the older post, Flirc mappings were mostly made using keyboard keys. This post concerns an update of a previous post. This guide can also be used with any other infrared remote. In this post the Logitech Harmony and Flirc are configured in such a way that they will work with both Android TV and Kodi. In addition, the Harmony device configuration does not power the Android TV device on and off when needed. Unfortunately, the keyboard keys used do not match with other Android applications, which prevents a single Logitech Harmony activity from controlling Android TV adequately. The profile uses Kodi’s keyboard controls. In Flirc’s firmware is a built in Kodi profile that can be used with a Logitech Harmony remote immediately. Flirc receives infrared commands and converts them to keypresses by emulating human interface devices, such as keyboards and game controllers. As the latest revision of the Shield TV (‘16GB, 2017’) lacks an infrared receiver, a Flirc USB was included. The lucky recipient of the gift uses a Logitech Harmony universal infrared remote control. The Shield TV is an Android TV device, which in this case would mostly be used for playing media through Kodi and Netflix. Last Christmas I gifted an Nvidia Shield TV. This is a short post about controlling Android TV using a Logitech Harmony infrared remote control and a Flirc USB.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |